Item Description
Slewing CZPT is also known as slewing equipment, CZPT , worm travel, rotary generate axle, rotary push vice, slew push, CZPT reducer and rotary travel unit. At existing the greater part of this kind of devices are caller Slewing CZPT .
Technological parameter for SD25-150B-RH-375A-REV inch slew drives
1. Variety: L25 inch slew drives
2. Self-locking gears: Sure
3. Rated output torque: 22.5kn-m
4. Tilting moment torque: 271kn-m
5. Static load ranking(axial): 2360
six. Static load score(radial): 945
7. CZPT load rating(axial): 590
8. CZPT load score(radial): 470
nine. Gear Ratio: a hundred and fifty: one
ten. CZPT ght: 230kgs
eleven. Supply time: 30days
Slewing travel introduction
1. Introduction of CZPT slewing push
LYHY Slewing CZPT motion can lessen CZPT usage, considering that the security role. In addition to the discipline of use in the everyday photo voltaic CZPT methods are generally utilised for Particular car, weighty-responsibility flat-panel truck, container cranes, truck mounted crane, car crane and aerial vehicles, cranes, gantry cranes, tiny wind CZPT stations, place communications, satellite receiver, and so on…The Slewing CZPT in the photo voltaic photovoltaic sector, the general configuration DC planetary reduction motor or AC geared motors Principal configuration of the hydraulic motor as a CZPT -pushed building machinery
LYHY Slewing CZPT basic principle of the big transmission ratio of the deceleration unit to transmit movement and CZPT among the two axes staggered in area. The Slewing CZPT transmission is typically the scenario of the principal factors of the worm and wheel bearings, shell, and the CZPT supply
As the core element of turntable bearings, can endure the axial load, radial load and overturning second.
2. Composition
Slewing drive can be divided into two different structures as for each different purposes.
Light load slewing generate
Heavy load slewing drive
The dimensions of slewing drives incorporate 3 inch, 5 inch, 7 inch, 9 inch, 12 inch, 14 inch, seventeen inch, 21 inch and twenty five inch.
three. Characteristics:
Slewing drive is a specific bearing. And a slewing generate normally consist of slewing bearing, worm shaft, housing, bearing, motor and so on. CZPT drive the worm shaft, the outer ring of slewing bearing will rotate, the outer ring output the torque via flange whilst the inner ring of slewing bearing is fixed in housing.
LYHY Slewing CZPT and rotary products, compared with the simplicity of installation, simplicity of routine maintenance, Set up room personal savings positive aspects to a increased extent.
four. Application:
Slewing drives are broadly used in aerospace region, photo voltaic CZPT methods, wind turbines, satellite broadcasting technique, and CZPT equipment like truck cranes, and male lifts, and so on. Lately several years, it has been prosperously used in photovoltaic CZPT technology techniques, particular automobile, weighty-obligation flat-panel truck, container cranes, truck mounted crane, auto crane and aerial vehicles, cranes, gantry cranes, little wind CZPT stations, place communications, satellite receiver, and many others.
Model | Rated output torque /KN-m | Tilting Instant torque /KN-m | Load /KN | Gear ratio | Self-locking gears | Boundary proportions (mm) | Weight (KG) | |||||||||||||||||||
Static load score, axial | Static load score,radial | Dynamic load ranking, axial | Dynamic load ranking,radial | L | L1 | L2 | L3 | H2 | H3 | H4 | ΦD | ΦD1 | ΦD2 | ΦD3 | ΦD4 | ΦD5 | n1-Y | n1-X | H | H1 | ||||||
three” | .2 | .five | thirty | sixteen.six | 9.six | 8.four | 62:one | yes | 346 | 153 | 114 | eighty | 14.5 | sixty.five | one hundred twenty five | a hundred | a hundred | 126 | six-M10 | 6-M10 | 190 | 109 | 12 | |||
five” | .3 | .eight | 76 | 22.6 | 13.eight | eleven.eight | 62:1 | indeed | 361 | 168 | 128 | 93.seven | 24.six | 7 | 38 | 161 | 135 | 103.five | 70 | 50 | 120 | 6-M10 | 7-M10 | 219 | seventy nine | eighteen |
7″ | one | thirteen.5 | 133 | 53 | 32 | 28 | 73:1 | yes | 398 | 182 | 166 | 132.7 | 23.four | 4.3 | 42.5 | 237.five | 203.2 | 163 | one hundred twenty.six | ninety eight | one hundred forty five | 8-M12 | 10-M12 | 295 | eighty one | 23 |
9″ | seven.three | 33.nine | 338 | a hundred thirty five | eighty one | seventy one | 61:1 | of course | 546 | 314 | 239 | 174.one | 29 | four.4 | 54.five | 316 | 270 | 222.five | 175 | one hundred forty five | 204 | 16-M16 | 15-M16 | 411 | 108 | fifty |
12″ | 9.two | fifty four.3 | 475 | 190 | 114 | a hundred | 78:1 | sure | 556 | 324 | 285 | 220 | 27 | four.four | fifty eight.5 | 401.5 | 358 | 308.five | 259 | 229 | 289 | 18-M16 | 19-M16 | 500 | a hundred and ten.5 | sixty |
14″ | ten.five | 67.eight | 555 | 222 | 133 | 117 | eighty five:one | sure | 547 | 330 | 303 | 238 | 28 | three.five | 59 | 435.5 | 390 | 342.five | 295 | 265 | 325 | eighteen-M16 | 23-M16 | 530 | 110 | seventy three |
17″ | fourteen.five | 135.six | 975 | 390 | 235 | 205 | 102:1 | yes | 555 | 338 | 340 | 275.three | 26 | four.six | 66 | 522 | 479.four | 425.5 | 365.1 | 324 | 406 | twenty-M16 | 20-M16 | 615 | 126 | 110 |
21″ | 20.2 | 203 | 1598 | 640 | 385 | 335 | one hundred twenty five:1 | yes | 678 | 461 | 398 | 333 | three.three | four.5 | seventy six | 616 | 584.two | 525.5 | 466.seven | 431.8 | 532 | 36-M20 | 35-M20 | 732 | 136.five | 158 |
twenty five” | 22.5 | 271 | 2360 | 945 | 590 | 470 | 150:one | Yes | 678 | 461 | 467 | 401.8 | 6.2 | 4.five | seventy eight.two | 744 | 675 | 620 | 585 | 512 | 628.five | 36-M20 | 35-M20 | 863 | 133.2 | 230 |
The drive factor is a worm. In order to blend the wheel/worm into a worm gear, it should be ensured that the middle distance is equivalent and the transmission ratio is equivalent. Center distances are available from stock in tiny steps among 17mm and 80mm. Every single heart length has several equipment ratios. Ep worm gears are appropriate for the generation of worm drives with a shaft angle of 90°. Using a worm generate, very massive reduction ratios (up to one hundred:1) can be reached.